Hi Guys anybody able to advise me i cannot get into the router to install kernel again.I had a problem updating it to 5.24 so i formatted the nand and went about trying to install it again.
I have also tried netinstall but the router does come up in the devices list however the microsd i have on the board is coming up netinstall.
Boot Server enabled Client Ip 192.168.88.1
…Lan 192.168.88.20
Any advice means plenty Kudos
…
RouterBOOT booter 3.02
RouterBoard 1100AHx2
CPU frequency: 1066 MHz
Memory size: 2048 MiB
NAND size: 128 MiB
Press any key within 2 seconds to enter setup..
trying bootp protocol… failed
kernel loading failed
loading kernel from nand… kernel not found or data is corrupted
trying bootp protocol…
RouterBOOT booter 3.02
RouterBoard 1100AHx2
CPU frequency: 1066 MHz
Memory size: 2048 MiB
NAND size: 128 MiB
Press any key within 2 seconds to enter setup
RouterBOOT-3.02
What do you want to configure?
d - boot delay
k - boot key
s - serial console
n - silent boot
o - boot device
f - cpu frequency
r - reset booter configuration
e - format nand
w - repartition nand
g - upgrade firmware
i - board info
p - boot protocol
b - booter options
t - do memory testing
x - exit setup
your choice: b - booter options
Select which booter you want to load:
- 1 - load regular booter
2 - force backup-booter loading
your choice: 2 - force backup-booter loading
RouterBOOT-3.02
What do you want to configure?
d - boot delay
k - boot key
s - serial console
n - silent boot
o - boot device
f - cpu frequency
r - reset booter configuration
e - format nand
w - repartition nand
g - upgrade firmware
i - board info
p - boot protocol
b - booter options
t - do memory testing
x - exit setup
your choice: exit
writing settings to flash… OK
RouterBOOT backup booter 3.02
RouterBoard 1100AHx2