1 - One core or Dual core system ?
2 - XFP, CX4, SFP or only 10GBASE-T
3 - routing performance ? pps performance.
4 - maybe TCAM for hardware firewall or routing ?? )
5 - price ???
did you see the file?
http://www.mikrotik.com/download/share/generic.pdf
yes, i see this file , but didnt find answers fo my questions 1, 3, 4, 5
specifications and tests are not published yet.
There will be no SFP ports on HighEnd Routerboards for the near future… this is what i got from this MUM
I suspect you may be proven wrong
SFP port is more required interface for high end core router.
Nawshad Ahmed
Bijoy Online Ltd.
once again:
1 - One core or Dual core system ? → one core
2 - XFP, CX4, SFP or only 10GBASE-T → only ten one gigabit ports, not 10G!
3 - routing performance ? pps performance. → published here http://www.routerboard.com/pdf/routerboard_performance_tests.pdf
4 - maybe TCAM for hardware firewall or routing ?? ) → no
5 - price ??? → cheapest of our rackmount routers. as the presentation mentions, this will be a LOW COST simple rackmount
I think you completely misunderstood the product
I understand the confusion on the port speed. The published information implied each port was capable of 10GigE, but thinking about a new low cost router having 10GigE ports seems kinda silly.
That said, what’s the MTU?
Oh, I assumed the 1200 would be higer performance than the 1100 series.
Looking your benchmarks, I think a couple of common scenarios should be tested.
Firewall On, Connection Tracking On, Masquerading (routing)
EOiP over PPtP with various encryption settings.
and how big the data storage size is?
like other routerboards, 64MB
ow shoot… can’t install the dude server on it then, the storage won’t be enough
RB1200 is low cost version with less features. For more features you need RB1100AH
No metarouter on RB 1200?
Due to CPU incompatibility, there is no metarouter for RB1200
Hello, I have a issue with RB1200, the RB desconect all user from hotspot, I did upgrade/downgrade too, check the configuration but the issue continue
user connect using hotspot web page, after 5 minutes internet services down and clients can’t use internet, all clients out and atfer 5 or 10 minutes they can connect again
the issue continue.
my rb1200 have 1gb ddr2 memory
I think the issue is with configuration, but I copied the configuration in RB450 and RB450 work without issue
what can I do?
Hello, I have a issue with RB1200, the RB desconect all user from hotpots, I did upgrade/downgrade too, check the configuration but the issue continue
user connect using hotpots web page, after 5 minutes internet services down and clients can’t use internet, all clients out and after 5 or 10 minutes they can connect again
the issue continue.
my rb1200 have 1gb ddr2 memory
I think the issue is with configuration, but I copied the configuration in RB450 and RB450 work without issue
what can I do?
You can start a new thread, specific to your problem.