RB2011 CAPsMAN2

RouterOS Wireless Networking
1

Hi,
My hardware is RB2011,hapac2, capac.
Did someone migrate it to CAPsMAN2.
I tried to do rb2011 as capsman for wifiwave2 on 7.13

set ca-certificate=none enabled=yes interfaces=all package-path="" require-peer-certificate=no upgrade-policy=none

and hap ac2 as cap with new driver but it can’t find capsman.
I wonder if is possible on such configuration

On similar network but with rb3011 and hap ax2 such configuration works.

2

capsman for wave2/wifi is configured under /interface/wifi/ on RB2011 … did you do it? The /capsman subtree is for legacy capsman.

3

Hi,
Missing certs for capsman was the problem even if not used

/interface/wifi/capsman/print 
                        ;;; failed to create certificate: CA not found (4)
                   enabled: yes
                interfaces: all
            ca-certificate: none
  require-peer-certificate: no
              package-path: 
            upgrade-policy: none

Now when I created certs i have all CAPs under Remote CAP

                        ;;; failed to create certificate: CA not found (4)
                   enabled: yes
                interfaces: all
  require-peer-certificate: no
              package-path: 
            upgrade-policy: none
  generated-ca-certificate: WiFi-CAPsMAN-CA-
     generated-certificate: WiFi-CAPsMAN-
4

It was too fast.
Still no connection to CAPsMAN
on capsman

/interface/wifi> capsman/remote-cap/print
Columns: IDENTITY, STATE, BOARD-NAME, VERSION
#  IDENTITY         STATE  BOARD-NAME        VERSION
0  biuro_dach_ant1  Ok     RBcAPGi-5acD2nD   7.13
1  dom_ant1         Ok     RBcAPGi-5acD2nD   7.13
2  dom_ap2          Ok     RBD52G-5HacD2HnD  7.13
3  dom_ap1          Ok     RB2011UiAS-2HnD   7.13
4  biuro_ap1        Ok     RBD52G-5HacD2HnD  7.13
/interface/wifi> radio/print
Columns: CAP, RADIO-MAC, INTERFACE
# CAP                             RADIO-MAC          INTERFACE
0 biuro_ap1@XX:XX:XX:XX:XX:XX%*c  XX:XX:XX:XX:XX:XX  cap-wifi1
1 biuro_ap1@XX:XX:XX:XX:XX:XX%*c  XX:XX:XX:XX:XX:XX  cap-wifi3
/interface/wifi> print
Flags: M - MASTER; B - BOUND; I - INACTIVE
Columns: NAME, MASTER-INTERFACE
#     NAME       MASTER-INTERFACE
;;; no connection to CAPsMAN
0 MBI cap-wifi1
1   I cap-wifi2  cap-wifi1
;;; no connection to CAPsMAN
2 MBI cap-wifi3

but in cap logs is connected

 06:00:49 caps,info selected CAPsMAN biuro_root@XX:XX:XX:XX:XX:XX%*8
 06:00:50 caps,info connected to biuro_root@XX:XX:XX:XX:XX:XX%*8