RB2011UAS bridge both switches

RouterOS Beginner Basics
1

What is the correct way to bridge the two switches in the RB2011UAS?

I assume ;

gateway on ether1
master 3,4,5 back to ether2
master 7,8,9,10 back to ether6
Bridge ONLY ether2,ether6
Add IP address to bridge.

Diagram https://i.mt.lv/routerboard/files/RB2011UiAS-160620170308.png

Many thanks

2

Yes, that is the correct way. Now, an update is coming that will change the way “master” ports work. It will switch the traffic automatically if it detects it. So, this long standing way will become antiquated.

3

Thank you.
What will be the new “proper” way? Any link to reading material on this?

4

It is written about here (look under the Bridge Hardware Offloading heading), and also here.