Rb2011uias-rm Beepèr stop working

Hardware MikroTik hardware general
1

Hello, I have one Rb2011uias-rm and I have this problem:

When I Start the device the beeper makes sounds, if I use :beep or any script to play sounds the beeper works OK.

But If I let te device for example 1 day ON the beeper stop working, If I try to play again any sound via :beep in console or via script DONT WORK.

If I restart the device beeper Works OK for a couple of hours (or 1 day).

Model: Rb2011uias-rm
Firmware: 3.24
RouterOS: RouterOS 6.32.1

I think is some software bug.

Anyone have this problem?

2

No, it’s okay for me (RB2011UiAS-2HnD). I don’t think this is software bug in your case. You can reset configuration and Netinstall RouterOS “from the blank page”, but this is probably all you can do.

3

Go to “system” “routerboard” “settings” look to “silent boot” are this select?

4

Many thanks for the replys.

@G2Dolphin
I will try to disable all scripts and try again.
Thanks for the tip using Netinstall (im new with mikrotik)

@plisken
Is not selected
/system routerboard settings> print

baud-rate: 115200
boot-delay: 2s
enter-setup-on: any-key
boot-device: nand-if-fail-then-ethernet
cpu-frequency: 600MHz
boot-protocol: bootp
enable-jumper-reset: yes
force-backup-booter: no
silent-boot: no

5

Try with other RouterOs
For downgrade see on my website.
In dutch but folow the printscreens a made
http://www.wirelessinfo.be/index.php/mikrotik/pages/upgrade