Hi all,
I seeking some help in regards to my recent purchase of a RB2011UiAS-RM.
I notice there is a POE port (ETH10) - does that mean I can power another device via this? How much power will this output and is it 802.3af compatible?
The other querry I have is, am I able to power this RB with a POE switch which has the below specifications?
PoE Out Voltage Range - 22-24VDC
PoE Max Wattage Per Port - 11.5W
PoE Method - Passive
Thanks!
Power output 500mA on Port 10, and you will get the same voltage as on input. This is passive PoE, not true 802.3af compliant.
The other querry I have is, am I able to power this RB with a POE switch which has the below specifications?
PoE Out Voltage Range - 22-24VDC
PoE Max Wattage Per Port - 11.5W
PoE Method - Passive
Yes, it should work with passive PoE.
That’s great! Thank you.
I’ve confirmed that my AP (Ubiquiti UAP) can be powered by that port - http://www.ubnt.com/unifi/unifi-ap/
Now just need to research how to set up the switch configuration and bridge it to ETH1.