RB260GS VLANs Tab

SwOS
1

The new VLAN tag functions that are displayed in the VLANs tab of the RB260GS - are they ingress or egress rules? This page is very different from the 250GS.

Also - what is being done with these functions that isn’t being handled on the other VLAN page?


Thanks!

2

Bump.

3

http://wiki.mikrotik.com/wiki/SwOS#RB260GS_VLANs_tab

4

Thanks! They didn’t have that on the Wiki yet when I posted the question!

5

This is very useful function allowing to solve this situation:

  • each packet incoming from port A will be marked as VLAN X when going to port B;
  • packets incoming from other ports will not be changed (neither packets with no VLAN) when going to port B.

This is what I need and it was not possible on RB250GS. My question is: Would this function be implemented on RB250GS in future releases of SwOS or it is not possible due to hardware? I’ve bought many RB250GS and I don’t want to throw them away and replace with RB260GS.

6

Maybe somebody else is also interested, here is the response from support: Vlan-based egress actions on RB250GS is not possible
due to hardware limitations. :frowning: