RB3011UiAS-RM

Hardware MikroTik hardware general
1

Hi, I’m mounting a lab and want to have two wan connections one of 300Mb and 1 on 50Mb. The idea is to use the 50Mb one for backup in case of failure.

I will connect about 20 devices though a switch or an external access point.

I’m taking a look at RB3011UiAS-RM or RB2011UiAS-RM and I wonder If I would get the 300Mb bandwith on the LAN (assuming lan clients are Gigabit LAN capable) or if the router will reduce (and how much) the available bandwith.

Thanks

2

Yes, you’ll get the 300Mbps. But check the RB4011, it’s CPU is more powerfull but lacks the USB port and the VLAN aware switch.

I have a RB3011 and two 300Mbps Internet links, but using failover and load balance, with mangle and QOS, ie. no fasttrack, it is not capable of the 600Mbps combining the two links.

I replaced it with a CCR2004, but a RB4011 should be enough.