RB4011iGS - POE-OUT problems

Hardware MikroTik hardware general
1

Hello!

We have some problems with the RB4011iGS and its POE-OUT by using an unifi AP-AC-PRO.
Spec-sheet says 19.2W are supported by the RB4011 - the AP has a maximum of 9W.
After two days the POE doesen´t work anymore. What can be the reason for it?
Tested with a second RB4011 with the same result.

Thanks and best regards
Chris

2

Use a MikroTik AP and you wont have problems with the POE out…

Your 4011 is fine…

3

AP-AC-PRO uses a PoE injector that is not common. I would never try to power it with a MikroTik device.

Regards.

4

thanks for your reply, but whats the reason that it works fine until a restart after 1 or 2 days?