RB4011iGS+RM Multi LAN

Hardware MikroTik hardware general
1

I have RB4011iGS+RM.
Is it possible to configure it with 1 WAN and 2 LAN? Like:
LAN1 (192.168.0.0/24) [ether2] → WAN [ether1]
LAN2 (192.168.1.0/24) [ether3] → WAN [ether1]

if yes, can someone copy the link of instruction?

2

Delete the default bridge and each port will act like its own LAN.

3

not that easy…quite a bit of more steps

4

Thank You,
Yes, as i found it needs bit more steps, let’s say we have default configuration of the Router and we need to have
ether3 port as a separate LAN2 for example 10.111.0.1/24, whereas
ether1 is a WAN port
and
ether2 is a LAN1 port 192.168.88.1/24

here are steps i did:

  1. in Bridge->Ports delete port on ether3
  2. in IP->Address List add IP Address (10.111.0.1/24) for ether3 interface
  3. if DHCP server also is needed then enable it in IP->DHCP Server for ether3, if you do this by clicking on DHCP Setup button (not by clicking on ‘+’ button) then relevant Pool will be created automatically, check it in IP->Pool
  4. if you need to access/manage Router from ether3 port too then create rules in firewall (IP->Firewall) for tcp and udp protocols

that’s all i did and it works:
i have internet and can manage Router from both ports: ether2 and ether3