RB411 is unable to connect to ubiquiti powerbridgeM5

krisan · December 23, 2011, 12:10pm

I bought a powerbridgeM5 which i want to use as AP to link two offices together. I configured the PBM5 as the AP and on the other end i used mikrotik RB411 as my CPE which is also 5Ghz antenna. When i scanned the network i could see the SSID of the powerbridgeM5 AP but cannot connect to it.
Can some one tell me if there is anything i am doing wrong?
Your response will be greatly appreciated.

normis · December 23, 2011, 12:25pm

disable airmax, as that’s a protocol that only ubnt devices can use.

siscom · December 24, 2011, 1:19am

Hi,

And you have to disable both Nstreme and/or NV2 on the Mikrotik side too.

Rgds,
Mark.

krisan · December 28, 2011, 6:56pm

Thank you guys very much for your response.

I still have a problem locating where to disable the airmax on the device. please tell me where i can locate it on the radio device.
Awaiting your response.

siscom · December 28, 2011, 8:32pm

Hi,

I’d look for that info on the ubnt site if I were you . They have a forum too.
Since this is a MikroTik user forum, management look dimly upon ubnt support issues/replies made here.

Rgds,
Mark.