Hello, I have problem with this miniPCI card on routerbouard 411, (OS level4, fw 3.1). When was wlan enabled RB was turnning down. With other card (for example CM9 or TL560) works normal. This card was used on RB112 and the same power 30W worked perfect. Please for help.
I’m not sure what you mean by turning down, but make sure that you don’t have compression enabled. I had some problems with the earlier RC’s rebooting when compression was enabled.
-Gerard
I’m sorry, I mean turning off. The routerboard switch off when CM11 enable and stayed off. After remove this card or substitution CM9 and getting new start works great. I have only one piece routerboard 411 at the moment, then I don’t try it on other board. I think, this routerboard isn’t able to work with high power cards. Can somebody try it please? Thanks
I’ve tested and sold RB411’s with XR2,XR5,XR9,XR3,SR2,SR9,R52,R52H,EMP8602S and CM9’s.. I don’t have any CM11’s to try though.
Make sure your power supply has enough current to handle the higher power cards..
-Gerard