Hi from spain.
I have problems to configurate a mikrotik on RB433.
I can navegate with all eth1-eth2-eht3
But i can not navegate with Wlan1
i want the rb433 works like basic AP that sits in front of a router, because i have a router and conbnect with this a MKT-T600 balancer.
i try to put differents ways of configurations:
1:
Address list …only bridge1
inside the bridge1 i put all eth1-2-3 and wlan1
2:
In Address list i put all interfaces
inside the bridge1 i put all eth1-2-3 and wlan1
and have the same problems, i can connect and navegate with all interfaces eth… unless Wlan1.(ap-bridge mode)
the configuration is the next:
MKT-T600 — balancer 192.168.1.1//255.255.255.0//dns 80.58.61.250 (router)
14 aps RB433, 192.168.1.2 eth1 or bridge 1, i try both.
and same problems, only navegate by cable, not by wireless.
Please, someone can help me.? i try via winbox and webbox, i prefer winbox,lol
with wlan i receive and tx packest but no navegate no ping to the router,
i put some pictures, and -----------------------
IF someone tells me steps to configurated this RB433, i will be “happy” 
(thanks to jwcn )
