RB433 dynamic wds latency

RouterOS Wireless Networking
1

Hi guys,

I have 3x RB433 each with 3x wireless N Cards connected to sector antennas. they are all configured as AP-Bridge with Dynamic WDS. i have bridged the ports and they are all on different channels. Wlan1-2412, wlan2-2437, wlan3-2462. this is the same on all RB’s. My signal is good and signal to Noise is on average about -110. my problem is that i have next to no latency on the one link and about 44% loss on the other. my times average around 300ms all round and there is not much traffic on the link. I have rstp enable on my bridges.

This is for a school that is putting in a hotspot so they need a stable link. please help anyone.

Thanks.

2

Well i was Running V4.17 and decided to try upgrade to V5.0rc11 and it just made it worse, so i downgarded to V4.16 on my central radio and it seems to be more stable, but still hi loss to the one radio.