RB433AH ethernet problem PHY ERROR trying dhcp protocol

Hardware MikroTik hardware general
1

Hi Sir,

So i loged in via serial and got the following:

Press any key within 2 second to enter setup..
kernel not found
PHY ERROR
trying bootp protocol…

try reinstall using netinstall and Xmodem unsuccessful, can any one help me fix this problem.


THANKS,

2

Please help me, solve this problem :frowning:

3

Your board is failed. PHY is the Ethernet transceiver that is used by RB433 to connect to Ethernet. Either it is faulty, or the processor is.

4

did u connected to ether1?

another way is via x-modem