RB433UAH weird bootloader info.

Hardware MikroTik hardware general
1

Hi.

A couple of days ago I managed to inspect some info on a 433UAH (ROS 5.5) and noticed different readings between Resources tab and Routerboard tab. BTW untill now I didn’t tried a new reboot (there was one by watchdog 10 hours ago) of this production device where ~60 CPEs are tied to and will not do it until I receive a 433AH I’ll order just in case.




Is it safe to “force” firmware upgrade? Used to be 2.29 since it cames inside routerboard.npk file.

What about the 100MHz CPU frequency while Resources reads correct 680MHz one?

Does anybody saw this before?

Regards;

2

This problem can occur when router tries to recover from crash. Try setting the CPU frequency back to default and rebooting the router.

3

Done.

& worked ok.

Watchdog was disabled so was necessary to cut power to reboot.

Anyway, now there is an extra 433AH around :slight_smile:

Thanks & Regards