Rb435G and Rb8000 Gigabit w/ MT Gigabit poe question.

Hardware MikroTik hardware general
1

So i have two MT Gigabit poe injectors…

neither of them power either the Rb800 or Rb435G.

Im using a 24V Power supply with the 435 and a 48V power supply for the Rb800.

If i use a standard poe, they both power up and work fine at 100 megabit.

Do i have to have a gigabit device plugged on the other end of the poe injector before it will

power up?? i’m not understanding this.

Thanks!

-Brad

2

Okay, figured out the problem, i knew i wasn’t retarded!

Bad Gigabit MT Poe injector. :slight_smile: Wierd i could get a bunk one new.

Pulled out another new injector, fired both boards right up.

-Brad