Hello,
i’ve discovered thta when major of the traffic is flowing through ethernet port , then the memory is leaking and the RB is out of memory in like 2 hours. When using only wireless interfaces the everything works almost perfect - only CPU is jumping up to 100% .
I see NO problem on x86 wrap or intel system.
Jan
could you tell us what kind of traffic and how many packets per second is going?
Which ethernet interfaces you were using?
Are you using connection-tracking?
Please make the support output file after the reboot of the router and then after 1 hour when you see that the memory is used a lot. Then send those files to support@mikrotik.com
Hi,
it doesnt matter if contrack is on or of, tried to disable packages etc. The problem is still here, using ether1. Didnt try other, as it is “live” access point device. I had downgraded it to 2.9.44 to make it stable but can make supouts with RC6 and same device on evening. The traffic flow is around 2Mbit stable and maybe 4M peaks combined dl/ul, 350-600packets combined.
When i tried to load it to bone router - also rb532, where is around 4000 packets stable flow, it is working only few minutes and reboots. Also using ether1 .
WIll send supouts on evening.
Jan
so you are using ether1 and wlan1? what wireless card?
please send the support output file to support@mikrotik.com so we could try to reproduce it.
using ether1, wlan1, 2, 3.
Supouts sent now.
Jan
for Uldis,
the ap were you have access now it is leaking…please give it a look.
regards
Ros