RB532A as router

RouterOS General
1

Hi all,
I’ve a strange problem with an RB532A with last RouterOS version (2.9.46): if I configure one IP address on its eth1 interface, I can ping and manage it. As soon as I add a new IP (on a different subnet of course) on another interface (e.g. wlan1), I cannot ping its IP on eth1 any more and I can manage it only via WinBox on its MAC address. :confused:

Any idea?

Ubiquity XR5 drivers
2

your gateway is your ether1 ip address?

3

Yes,
but this is not important because my PC and MT eth1 are on the same subnet, e.g.

PC 192.168.1.2/24
MT eth1 192.168.1.1/24
MT wlan1 192.168.2.1/24

if I assign only one IP to MT (eth1 or wlan1) everything is ok, but when I assign the second IP I cannot reach none of them.

Rgds

4

I thought it was due to the miniPCI used (Ubiquity XR5), so I’ve change it with an R52, but nothing changed.. :frowning:

5

Ok, my fault…
I’ve inserted an IP address without mask information: 192.168.1.1 instead of 192.168.1.1**/24**
I’m sorry… :blush: :blush: :blush:

Rgds