Hi all.
Today I bought a RB750G, Mikrotik routers is something new to me so I need some help configure it as I need.
So, till now I had a D-Link DIR-615, but sometimes I had problems with my internet provider so with decided to have a backup provider, that means 2 WAN ports and the router that I have now doesn’t support this.
This is what I have:
1’st provider : PPPoE(Username / Password)
Username: XXXX
Password: XXXX
DNS1: XXX.XXX.XXX.XXX
DNS2: XXX.XXX.XXX.XXX
2’nd provider: Static IP
IP: XXX.XXX.XXX.XXX
Gateway: XXX.XXX.XXX.XXX
DNS1: XXX.XXX.XXX.XXX
DNS2: XXX.XXX.XXX.XXX
So 1 and 2 should be WAN ports, the other 3 simple LAN, I also need DHCP.
DHCP address range: 192.168.0.3 - 192.168.0.199
I also need the load balancing setting running for the WAN ports, both Providers should work at the same time and if one fails the other one should work fine.
I have a few ports forwarded to a server:
192.168.0.2 - Port: 21, 25, 81, 110,143
192.168.0.2 - Port: 443, 465, 993, 995
…and the virtual server (I think this is the same as port forward) for other IP’s, this is for Remote Desktop:
192.168.0.200 - Port 3128
192.168.0.02 - Port 3131
..and so on.
I think this is it, waiting for your replies.
Thank you in advance.
At the moment I’m here…
