RB750G cpu issue

RouterOS Beginner Basics
1

hey guys i have my new 2 same rb750g the other one shows 400mhz only, this could be 680Mhz right?

][paradisegarden@ParadiseGarden Manila] /system routerboard> print
routerboard: yes
model: "750G"
serial-number: "xxxxxxxxxxxx"
current-firmware: "2.27"
upgrade-firmware: "2.27"




[paradisegarden@ParadiseGarden Manila] /system license> print
    software-id: "xxxx-xxxx"
  upgradable-to: v6.x
         nlevel: 4
       features:




[paradisegarden@ParadiseGarden Manila] /system resource> print
                   uptime: 22m58s
                  version: "4.11"
              free-memory: 14232kB
             total-memory: 29944kB
                      cpu: "MIPS 24K V7.4"
                cpu-count: 1
            cpu-frequency: 400MHz
                 cpu-load: 3
           free-hdd-space: 29932kB
          total-hdd-space: 61440kB
  write-sect-since-reboot: 374
         write-sect-total: 562095
               bad-blocks: 0%
        architecture-name: "mipsbe"
               board-name: "RB750G"
                 platform: "MikroTik"

any input? thanks thanks

2

email support with the serial number and softid that you have blacked out here.

3

Hello Normis

Support Ticket#2010101366000127

thanks

4

normis it seems the cpu seeting is change now :slight_smile: but the box not yet rebooted

[paradisegarden@ParadiseGarden Manila] /system routerboard settings> set cpu-frequency=680

[paradisegarden@ParadiseGarden Manila] /system routerboard settings> print
boot-device: nand-if-fail-then-ethernet
cpu-frequency: 680MHz
boot-protocol: bootp
force-backup-booter: no
silent-boot: no

5

you still need to reboot it to apply this setting permanently

6

thanks normis for the assistance.

cheers