RB750G tag and untag ports

Hardware MikroTik hardware general
1

Hello, try to setup some simple configuration on RB750G :

Port 2-5 in switch group

Port 5 connect to PC and must be untagged, but on out port (port 3) it must be tagged with vlan-id 7
Port 3 connect to L2 switch and must be tagged.

Try many config, rule and others.. but didnt work, on L2 switch i cant see any tagged packets with vlan-id 7.

When i change RB750G to L2 switch with same config - all work fine

2

Make sure you have the following configuration

/interface ethernet switch port
set 4 vlan-header=always-strip 
set 2 vlan-header=add-if-missing