Hi all,
today i have done a RouterOS upgrade to v6.11 on a RB750GL.
I copied the file to the Files window in WebCfg and then rebooted the router.
From then on i cannot ping the system and reset doesn’t help.
What can i do to reinstall the OS?
Thanks
Use netinstall procedure
http://www.wirelessinfo.be/index.php/mikrotik/pages/netinstalle
I have already followed the steps to install from NetInstall but it doesn’t work.
Tried again in a different computer in case i miss something but no luck.
What’s happend?
Can you not use netinstall?
Ore have you use netinstall and is still the same?
Is firewall disabled on youre computer?
I am using netinstall for 6.11 and the device mac address doesn’t appear in netinstall after following the boot process.
I am holding the reset until the act button is not flashing anymore.
Which is the correct port to be connected port 1 (wan) or port 2(lan)?
You must use port 1
Tried again in port 1 with no luck.
In the Ports/Drive window i should the computer drives or not?
Because i cannot see anything there.
Have you follow the procedure?
http://www.wirelessinfo.be/index.php/mikrotik/pages/netinstalle
Disabled firewall on your computer?
What Os on computer?
Yes i have followed the procedure as described.
Windows Firewall is disabled from services. OS is Windows 7 Professional.
Hold on the reset button 15 seconds and wait a few seconds if than the station not comes up.
If don’t work hold the button what longer.
So i was able after a bunch of tries to get the device appear in the NetInstall.
I have rebooted and i am trying to check what is the ip of the device now. Default ip is not working.
Try to connect with Mac-address and don’t forget you must connect from port 2-5
How can i connect with the mac-address ?
Found it! Thanks.
Youre welcome and thanks