Hi MT Team,
any more info you can reveal fpr this upcoming board?
I really like the network interface design of the RB450G, especially the separatable first interface and the switch chip features.
Im also using some VLAN tag rewriting functions of the AR8316 for some neat tricks.
Any info on what to expect from this new board?
Cheers,
Jan
The RB850Gx2 have identical dimension, serial port, reset, jack, ethernet placement and characteristics of 450G except of:
Dual Core 500MHz PPC CPU (Single core 680MHz MIPS-BE CPU on 450G)
512MB RAM (256MB on 450G)
has it?
Block diagram please.
ARBEIT ANGST KONSUMTERROR
I’m not talking about mechanical features rextended…
As barkas said, a block diagram including switch chip specs is what I’d like to see.
Block diagram please.
The RB850Gx2 will be on sale at late april 2014 as announced in the
newsletter no. 55, and then, if the RB850Gx2 is launched the manual,
the block diagram, etc. will be also shown at www.routerboard.com.
I think they would not show something else as some tech specs. first.
Thoughts on Throughput?..
Rackmount options?
Ah thanks, so for security features the will be HW support. I was thinking about forwarding 
I think after launching the test results want also be shown
on the http://www.routerboard.com website like all the other RBs.
Rackmount options?
It is a replacement for the RB450G, what rack mount options we have had
for the RB450G?
But ok there are some generally options for RB if you are interested.
Link: 19" Dual rack case for;
PC Engines Boards
ALIX.2D0
ALIX.2D1/2D5
ALIX.2D2
ALIX.3D2
ALIX.3D3
ALIX.2D13
ALIX.6E1 /6E2 /6F2
ALIX.2D19
MikroTik RouterBOARDs
411, 411U, 411AR, 411AH, 411UAHR
433, 433AH, 433UAH
450, 450G
493, 493AH, 493G
800
Enclosure Plate Blank
fan for 19" rackmount
If the RB850Gx2 has the same dimensions as the RB450G and announced in the Newsletter
No. 55, you will be able to use the both solutions above also for the RB850Gx2.
The Rack mount cases sold by Varia are very good, I used one of this cases fitted with a RB450G and an ALIX board, made a nice routing and generic x86 platform in 1U. 
I was hoping for some info from MT, as the board seems to be ready judging from the pictures in the presentation and brochure.
But somehow that seems to be asking for too much. 
Still looking for a complete all in one tower router.
RB850Gx2 seems like a good platform to build on. It just needs an SFP port and PoE out on at least 4 ports.
Then just add a 24V UPS and we’re off to the races.
What puzzles me is the RAM size. What do we need 512MB of RAM for when we AFAIK can’t use Metarouters on it, because it is a dual core architecture?
What puzzles me is the RAM size.
Ok in related to the circumstance and with a viewing eye to the metarouter support
it would be truth, but DHCP and DNS entries must also be stored and with IPv6
this will be much more then in former times and with an outlook to new features,
upcoming options or the new announced routing engine it is in my eyes better to
have more then less RAM inside.
What do we need 512MB of RAM for when we AFAIK can’t use
Metarouters on it, because it is a dual core architecture?
I am considering, that would very sadly also in my eyes but perhaps
they turn around and this option will be inserted later, because of so
many different models and other things at the same time now.
Mikrotik does not listen, and I’ve seen many comments censored, we are not mere complainers users, we are enthusiasts and experts who work assembling their routers, in short: their customers and basis why Mikrotik invoice € 40M annually.
No censure this message is important.
We are not early adopters, we need stable technology, improve their software development processes because staff seem to lack quality assurance, most are terrified with routeros 6.xx failures and the CCR models.
In 2011 series describe them as low cost, please do not use these words, our clients think they are assembling a shit, we are synonymous as cost effective or other for defining the same idea.
Many needs routers type 450G and 2011 series (midd cpu and good ram) with poe output on all ports (this allows us to not have use a poe switch or evaluate new products of UBNT).
Very important: devices not only have to be good if not also appear so. We do not mind paying € 30-40 for a 2011 model with more professional look:
MikroTik team - please answer - WHEN we shoould expect that RB850Gx2 at the market???
its more like 1009 in your description, than 850gx2 as 450g successor.
which had both, SFP, PoE and dual-power.
more curious about gap between 850gx2 and 1009 and possible product to fill it.
heard some stores - already accept pre-orders, so probably its sooner, than we’re expected.
that would be RB1100Hx2/Hx2 and variations.
X-x
This sh#t have Max L2 MTU 1506 only!
RB850Gx2 ether1-ether5:1506
It is absurd to a new product with max L2 MTU 1506, its use will be very limited.
I already bought one, I’m sorry.
Yeah, completelly agree. All other is almost ideal at this model, but not the Ethernet L2 MTU. It’s embarrasing:
L2 MTU: 1506
Max L2 MTU: 1506
