Please i want to know the distance RB921GS-5HPacD-19S can travel
Without considering subsequent supplies,
depend on how many fuel have the vehicle where the RB921GS-5HPacD-19S is transported.
Am talking about mANTBox 19s!!!
I know.
RB921GS-5HPacD-19S is technical/model name,
mANTBox 19s is the commercial/easy name.
The peripheral can not travel alone, you have to put it on a transport.
Ok....what am trying to say is that, after setting up, what is the distance it can cover in terms of beam
width
ahhhh… now is clear 
33Km at ground level, without obstacles.
more you go up, more far you can go (without obstacles)…
But really do not go over 16Km, and depend also on EIRP on your country and how many CPE on 120° you want put.
I have a 411ah with 24dBi antenna and R52hn device connected to it with distance of 9.9km but am not getting a good throughput...
configuration wise is there anything i can do....
please help
rextended you crack me up, jajajaja
My response to “Am talking about mANTBox 19s!!!” would have been…Ohh, thats heavy, transporting it on a scooter may not be possible.. 
hahahahahahahaha
I’ts important to do not take all seriously, sorry for the joke, but when I read “travel” I can not resist…
Usually I use that device for max 20 CPE @ 16Km and the max speed of the device can reach 50 / 60 Mbit @20MHz,
but I sell only 20Mbps contracts or less, for traffic concurrency between all CPE’s.
For Client I use varous ac CPE depending on distance, SXTsq 5 ac (0-1km), Disc 5 ac (1-3km), DynaDish 5 ac (12-16km),
RB911G-5HPacD with personalized case with integrated H+V 23dBi antenna (3-12km).
so meaning i have to use AC cards or devices to get more speed??
because its only one device but am not getting even up to 20Mbps
you can use a 802.11a device on 802.11a/n/ac products… and what you expect?
and what is that device?