Hello,
On RB951 i have set an ip address 192.168.1.1/24 to an ethernet port ,the port is not member to any bridge, master port is set to none, auto negotiation is on, tx rx flow control is on, loop protect is off.
On Spa 122 i have set the ip address 192.168.1.2/24 and layer 3 ping works, i have set STUN Enable,NAT Mapping Enable,NAT Keep Alive Enable.
I have set to use dns 8.8.8.8 and it seems that it doesn’t work . It doesn’t register to the voip proivider but i think it is not able to reach the internet, because masquerade rule has 0 bytes 0 packets.
On RB951 i have set a masquerade rule chain=srcnat action=masquerade src-address=192.168.1.2 out-interface=pppoe-out1 log=no log-prefix=“”
also on RB951 i am allowing input and forward chain all the established and related connections from spa 122.
It seems like masquerade doesn’t work, is it something that i am missing or is it a compatibility issue ?
I have spent DAYS troubleshooting it, is there any other voip hardware within that price range that it is tested with mikrotik ?