RBLHGG-5HPacD2HPnD-XL LHG XL no DHCP asign on slave site in bridge

RouterOS Wireless Networking
1

hello. i got two RBLHGG-5HPacD2HPnD-XL LHG XL in link
master
bridge mode
no firewall
no nat
no dhcp serwer
dns 8.8.8.8
in bridge list only ethr1 and wlan2 (5ghz)

slave
station pseudobridge mode
all the same
no firewall
no nat
no dhcp serwer
dns 8.8.8.8
in bridge list only ethr1 and wlan2 (5ghz)

link its good, connected with 300mbit
but not work dhcp serwer on slave site, cant get adress on device from dhcp serwer from master site , from ISP Router :frowning: on master site all ok, connect device - get ip from DHCP.
but if i make static adress on device, notebook, all right, can access to web, lan on master site and all of lan master site. but dhcp cant asign my every device on slave site.
if i turn on dhcp client on LHG master it have get but if i turn on slave LHG they searching and LHR cant getting ip from ISP router.
can someone describe what can try use ? thanks, sorry about english

2

Since your wireless setup consists of all Mikrotik devices, your slave should be configured to “station-bridge” mode … pseudobridge has a heap of problems, missing DHCP assignments is one of them.

Read extensive article about different station modes and their problems.

3

yes, that right !! i reset configuration, take mode station-bridge on slave site and all work, dhcp asign. thanks a lot for help.
support from seller tell me use station pseudobridge - thats wrong.