Dear Mikrotik community,
my RBSXTR rev.3 shows no signs that there would be any system/health parameters available. I’m on 6.48.2, which is listet as the latest firmware for my device. With Winbox and WebFig it doesn’t even show up in the menu tree, and in Terminal there is simply no output.
[admin@MikroTik] > system health get temperature
[admin@MikroTik] > system health get voltage
[admin@MikroTik] >
In an older post, the issue was raised that the temperature sensor was inaccurate in the SXT, but on mine the whole system/health section is missing, that is different. [1] In another thread the system/health on a SXT seems working. [2] From the screenshots I conclude that in both cases older WiFi models of the SXT were used, so it is not directly applicable to mine (SXT LTE6).
Is there an oversight on my side, or is this functionality simply missing? For an outdoor product, it seems to be very strange that it is missing.
Thanks
[1] http://forum.mikrotik.com/t/sxt-wrong-system-health-readings/46520/1
[2] http://forum.mikrotik.com/t/6-23-system-health-is-not-working-properly/84026/1