Hi there
I have 2 Ubiquiti Nanobeams setup point to point and have a RB750 on each side for the routing.
RB1
ether1 192.168.10.8/24 (Nanobeam connected to this interface IP = 192.168.10.1)
ether2 (LAN) 10.0.20.254/24
ROS = 5.14
No firewall rules
Route 10.0.1.0/24 via 192.168.10.13
Can ping from RB1 to RB2,no problem
RB2
ether1 192.168.10.13/24 (Nanobeam connected to this interface IP = 192.168.10.2)
ether5 10.0.1.254/24 (LAN)
ROS = 6.17
No firewall rules created
Route10.0.20.0/24 via 192.168.10.8
Receive redirect host when I ping 10.0.20.254
What am I doing wrong?
Can you please assist?
Regards
Marnus