Reinstall

waqas · February 10, 2011, 6:03pm

i trying to reset my rb450g in new terminal and after rebooting it have some unknown problem .

i try to connect with hyper terminal but its shows some error …

Loading kernel form nand… ok
setting up elf image … ok
jumping to kernel code

Kernel panic - not syncing: no init found. try passing init= option to kernel ..

Some body plz help

Regard

Waqas Ahmad

fewi · February 10, 2011, 6:10pm

Reinstall it via NetInstall.
http://wiki.mikrotik.com/wiki/Manual:Netinstall

You probably want to make a dedicated topic for that, though - I don’t think the mods meant for this thread to be for general discussion. I’m a little surprised it isn’t locked.

waqas · February 11, 2011, 10:09am

first of all thanks for reply ..

I tried this one but still have problem … when i press ( O ) for boot device they said your choice refresh .. watch this plz ..

Regards

Waqas Ahmad

neandero · February 12, 2011, 3:45pm

I once came across this situation, but following all the helps provided here didn’t solve my prob, so I return the product for replacement!.

n21roadie · February 12, 2011, 4:15pm

Have you got the computer with hyperterminal (which will act as server for netinstall) on the same IP range (192.168.1.x) as the client (RB450) is being given 192.168.1.2 address, your screen shot shows only local drive D:\ and not the MK RB450 device which should show as nsteme with mac address, when connected then reinstall the MK OS you are trying to use.