See http://forum.mikrotik.com/t/dhcpv6-pd-radius-accounting/77558/1 I have also confirmed with a Packet Capture between the routerboard and radius server that that attribute (Delegated-IPv6-Prefix) is not sent, even though the pool on the Routerboard does show that a prefix has been delegated. (N…

6.43.8 (2018-Dec-21 07:10) no news and changes. Does anyone in MikroTik deal with this problem?

when we will have a novelty about a smooth operation, report prefix delegation. An alternative was presented in the GTER for PD logging ftp://ftp.registro.br/pub/gter/gter46/ slide number 7

I have hope that they are still working on this and on IPv6 RADIUS accounting. They seem to have prioritized IPv6-related enhancements in the past year or so, judging by the change logs.

+1 Mikrotik, please tell us some estimated timeframe when this feature will be finished, so we can decide: wait longer, or go with accel-ppp on Linux instead (it’s a lot of work, so it would not be fun to do all this work only to find out it was unnecessary because you finally implemented this feat…

We have been using a workaround for now, although I’m not sure whether it will work for everybody, if it does help someone I can post the script. We have a script that runs that turns any dynamic DHCPv6 PPPoE bindings into static bindings, so that if the customer disconnects and reconnects, they get…

We have been using a workaround for now, although I’m not sure whether it will work for everybody, if it does help someone I can post the script. We have a script that runs that turns any dynamic DHCPv6 PPPoE bindings into static bindings, so that if the customer disconnects and reconnects, they g…

Dear friend, I could post the script. Here it is - we run this every 5 minutes using the scheduler: /ipv6 dhcp-server binding; :foreach i in=[find server~"pppoe"] do={ make-static $i; set $i comment=[get $i server]; set $i server=all; } It works well and users always get the same prefix…

Dear friend, I could post the script. Here it is - we run this every 5 minutes using the scheduler: /ipv6 dhcp-server binding; :foreach i in=[find server~"pppoe"] do={ make-static $i; set $i comment=[get $i server]; set $i server=all; } It works well and users always get the same pref…

@saaremaa and @marekm is this workaround useful for you at all? In my case, this method will not help. It is required that the binding of the prefix to the client’s account be in the billing and issued by the Radius attribute. This is a requirement of Roskomnadzor (Russia).

Any news? It seems to me - again, no.

Report "Delegated-IPv6-Prefix" attribute for PPPoE

RouterOS General

DuhBatista December 24, 2018, 9:24pm 162

Dear friend, I could post the script.