Rootenna for RB411

This one : http://www.microcom.us/wlana0044.html
And those : http://www.streakwave.com/Itemdesc.asp?ic=ARC-IA5823B01&eq=&Tp=
http://www.streakwave.com/Itemdesc.asp?ic=ARC-IA5823B02&eq=&Tp=

Which is best if there is any one tested them … also any other alternative for client CPE “enclosure + antenna” they must fit RB411 .

thanks …

I’ve heard good things about Arc and their bracket looks good.

Check out titanwirelessonline.com also. I think they sell some CPE kits and may have more options to look at.

Poynting also makes very good quality products. They have been to some MUMs as well as ARC. They both are very good choices.

Ok , i should try both of ARC and poynting and then deciding which is which …
but ARC has 23dbi patches ant where poynting has the max of 19dbi in 5GHz

thanks to all …

We have hundreds of the Poynting products installed.

Rock solid - well made…

/T

http://www.mars-antennas.com/item/g_antennas_type_1-43.html

Awesome mount-kit for an easy installation.. and 22dbi antenna…

ahem…

:sunglasses:

they fit… i got a lot of them with rb411 in it :sunglasses:

Vpol only! :frowning:

You can use them with Hpol just rotate it by 90°

By the way guys , are you using dual polarization antennas for antenna divirsity “if it’s already featured in ROS” issues to receive the clearer signal if multipath issue happens in the way , Or you are using dual pol antennas to use Dual NStream and reduce the cost of using 2 physical antennas ?

or something else ? :X

thanks .

http://www.roc-noc.com/home.php?cat=18

Built to order ARC Wireless Gen II with Mikrotik RB411, A or AH and choice of radio card. The quality is much higher than the Rootennas that we have used in the past.

I have installed several of these over the past month. My favorite was 4.5 mile 3.65GHz PtP link using RB411AH. I am seeing 20.5Mbps tcp in both directions with 10 to 15% cpu load (while running bandwidth test locally).

Tom

Good choice roc-noc.com , the 23dbi 5ghz has been added reciently coz i checked your web site before 3 days it wasn't there :smiley:

But is it the dual pol ARC antenna or the single pol ?

Also no one answered me here :

By the way guys , are you using dual polarization antennas for antenna divirsity "if it's already featured in ROS" issues to receive the clearer signal if multipath issue happens in the way , Or you are using dual pol antennas to use Dual NStream and reduce the cost of using 2 physical antennas ?

or something else ? :X

thanks ...

I have to ask the obvious. What about the Rootenna Rootenna (a.k.a. the PacWireless one)?
RB411 fit just fine in them.

You soon change your mind on the roots once you find one full of water.