I have a laptop with 1920x1080 screen resolution, and enabled WindowsDPI scaling at WinBox settings (right mouse click>properties…). There is a big problem with LOG, because there is no all information about TIME, for instance like this: May/23/2018 07:5… memory system, info… - NOT full time - no minutes, seconds.
MikroTik team - please repair that problem with log displaying at high resolution and Windows scaling with WinBox.
No one have that problem with MikroTik? I can’t believe, that no one usigin similar settings ath high screen resolution windows scaling ang MikroTik log displaying at WinBox.
It works, if you set it up properly:
http://forum.mikrotik.com/t/winbox-on-high-dpi-screens/109857/1
No - it’s not “properly” when it’s blurry. At that settings - WinBox at my screen is blurry. Much better setting is “application” at properties, but… the log is “not full displaying” at that setting:(
MikroTik Team - could You repair that problem with WinBox? (at the first post). Thank You.
MikroTik team - is there any chance that You repair that problem??!
Posting a screen shot showing the problem would help.
And if its a bug, this is not the correct place to ask for help.
Send an email to support@mikrotik.com
I have send e-mail to Mikroik support a YEAR AGO! : Ticket#2018092422000856
-----Original Message-----
From: Martins S. [MikroTik Support] <> support@mikrotik.com> >
Sent: Tuesday, September 25, 2018 9:24 AM
Subject: Re: [Ticket#2018092422000856] ROS 6.x LOG display problem with high
resolution and scalingHello,
We do have plans to address this problem in future Winbox releases.
However, this would require major re-work of Winbox tool so we can not
provide any ETA for such improvements at the moment.Best regards,
Martins S.
There is no solution at today - one year later!
MIKROTIK TEAM - PLEASE REPAIR THAT BUG AT NEXT WINBOX RELEASE. THANK YOU.
It should be fixed, but in the meantime send your logs to an external syslog server.
See my project here: http://forum.mikrotik.com/t/tool-using-splunk-to-analyse-mikrotik-logs-3-3-graphing-everything/121810/1
The issue is from at least 2013, if not from the beginning. ( http://forum.mikrotik.com/t/request-winbox-log-window-wrong-columns-width/69917/1 )
Still present in May 2020