ROS 7.15.3 100% CPU with routing/bgp/advertisments print where peer= tab autocomplete

RouterOS General
1

Router CCR2216-1G-12XS-2XQ
Firmware 7.15.3
Board 7.15.3

I used to be able to see what advertisements I was sending specific peers in ROS6 without pegging the cpu to 100%. All I did was type “routing/bgp/advertisements where peer=” and then I hit tab to get a list of my peers to select from and terminal freezes. I am assuming it is trying to pull the list of peers from the actual advertisements instead of the actual active bgp session list which is way less data. I am peering at an IX and have 12 BGP peers at the moment. Really need to be able to troubleshoot my announcements without bricking my core router. Anyone else had a similar issue?

2

I dont get why I have no tools in the router to analyses my routes through ip/routes or routing/bgp/advertisements without pegging a CPU on the highest end mikrotik router with only 520,000 routes when a basic juniper MX204 can handle all commands with ease with 2 million plus routes. Sigh! To have a real budget I guess. I love Mikrotik but I just want to be able to troubleshoot when there are issues without hosing winbox, winbox terminal, or ssh.

3

FYI CPU Profile puts routing as the culprit at 92% of the 100%cpu