Hi guys,
how can i configure recursive route for failover ? Directly connected route rule to public address is active(with scope 10), but the second route rule with dst. all nets with the getaway set with same public address is invalid - red color !?
https://wiki.mikrotik.com/wiki/Manual:IP/Route#Nexthop_lookup
https://wiki.mikrotik.com/wiki/Manual:Using_scope_and_target-scope_attributes
The route rule works under ROS v6.xx and does not work with ROS v7.xx?
Your config seems wrong, hence I posted the links. i.e. you have 2 routes with a scope of 10, so how must the recursive route decide which route to use?
In this case, what I did for review should be properly inactive, not invalid … but any other configuration with multiple WANs and recursive paths is the same !
ros v7.1 in ipv4 the same problem with recursive routing.
Everything works in ros6.
How to solve?
Hi, I have the same problem with ROS 7.1, can anyone help?
Thank you.
Just a guess: increase target-scope of your recursive route. If that didn’t help - post your config.