ros X86 installation stop at the install start dialogue

Hardware MikroTik hardware general
1

dear mikrotik users,

i hope you can help me, with my problem to install a X86 Ros on a PC.

my problem is, if i try to install the ros x86 (fw 5.5 or 4.17) from the cd or over netinstall, it stop´s at the install start dialogue.

first of all the hardware of our pc.

CPU: Intel E3400 2.60GHz 1MB Cache Link for more Information: http://ark.intel.com/products/42772/Intel-Celeron-Processor-E3400-(1M-Cache-2_60-GHz-800-MHz-FSB)
Mainboard: ASRock 775i65G → http://www.asrock.com/mb/overview.asp?Model=775i65G
HDD: The HDD is connected with IDE.
RAM: 2 GB

i tryed to install the ros X86 over a cd with a X86 image and over netinstall, both options have the same problem, the start dialogue stop´s at:

netinstall message:

trying to load: pxelinux.cfg/01-00-04-75-be-fa-
loading linux…
loading initrd.rgz
ready.

cd install message:

loading linux…
loading initrd.rgz
ready.

after waiting for a few minutes it doesn’t continue, if i press any key, its the same, so what can be the problem? any idea?


at this links, you can find, a pictures of the start screen:
cd install screen: http://proletentoaster.com/upload/59accc9a40b0f5584586ec9717233fda15776fae621404b6.jpg


best regards phil

2

can you attach storage of the router to some windows machine and do netinstall on the disk dirrectly and try to boot the router from that?

3

Hello,

now i tryed to install it over netinstall on a Windows maschine.
I integrate it as secondary drive, to my Windows system and i format the drive in the NTFS data system.
Then i install, on the new partition with netinstall, the rosx86 system.

If i try to boot from the hdd with the Mikrotik system, the pc can´t find any boot media.

In the boot process i get the following error report: "insert boot media in selected boot device and press a key_.

maybe the motherboard isn´t supported, i think last possible problem is the motherboard? Or any other Idea?

best regards
phil

4

Did you solve it?