# Route the traffic through a remote Server

**URL:** <https://forum.mikrotik.com/t/route-the-traffic-through-a-remote-server/149999>\
**Category:** Beginner Basics\
**Created:** [June 24, 2021, 2:30pm UTC](https://forum.mikrotik.com/t/route-the-traffic-through-a-remote-server/149999 "2021-06-24T14:30:34Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![erkexzcx](https://forum.mikrotik.com/user_avatar/forum.mikrotik.com/erkexzcx/32/2469_2.png) [@erkexzcx](https://forum.mikrotik.com/u/erkexzcx)\
**Post date:** [June 25, 2021, 8:59am UTC](https://forum.mikrotik.com/t/route-the-traffic-through-a-remote-server/149999/3 "2021-06-25T08:59:22Z")

</div>

So you have a VPS and you have a “MicroTik” router. What you specifically asking is VPN… 😃

Something like this, except you will be using **Strongswan** for IPSEC/IKE2 VPN protocol:

- [http://forum.mikrotik.com/t/nordvpn-ipsec-ikev2-killswitch-for-ros6/144817/1](http://forum.mikrotik.com/t/nordvpn-ipsec-ikev2-killswitch-for-ros6/144817/1)
- [http://forum.mikrotik.com/t/ipsec-ike2-with-certificates-vpn-server-guide-for-remote-access/149434/1](http://forum.mikrotik.com/t/ipsec-ike2-with-certificates-vpn-server-guide-for-remote-access/149434/1)
- [http://forum.mikrotik.com/t/mikrotik-behind-nat-to-mikrotik-ipsec-ike2-with-certs-tunnel-eoip/144952/1](http://forum.mikrotik.com/t/mikrotik-behind-nat-to-mikrotik-ipsec-ike2-with-certs-tunnel-eoip/144952/1)

If you have “MicroTik” router running “RooterOS” 7, you should instead go with Wireguard as it is MUCH simpler to set it up.

---

_[View the full topic](https://forum.mikrotik.com/t/route-the-traffic-through-a-remote-server/149999)._
