Route to 2nd network

RouterOS General
1

Hello everyone,

Thanks for all the help you provide here!

I have a separate network for the Security Cameras and Access Control System from the main network, but I need access to those systems from the main network. Here is the configuration:
Ether1 - WAN/ISP
Ether2 - Main Network (192.168.88.x)
Ether3 - Main Network (192.168.88.x)
Ether4 - Main Network (192.168.88.x)
Ether5 - Security Cameras & Access Control system (They are doing whatever they want and all traffic is routed out Ether1 (192.168.200.x))

I need to connect to these devices from the 192.168.88.x network:
Cameras are at 192.168.200.195
Access Control (door) is at 192.168.200.172

I’m not sure what to show from the router configuration to help with this. I can tell you that Ether5 is part of a bridge (sec_br - Root Port). Ether2 is bridge1 - designated port, Ether3 is bridge1 - Root port and Ether4 bridge1 - designated port.

I didn’t create this configuration, I’m only trying to get access to the Cameras and Access Control systems.

Thanks for all your help.
Darrin

2

Suggest you get someone who knows MT config to make the changes, like the person who setup the config.

/export hide-sensitive file=anynameyouwish,

Open in notepadd++
Remove the serial number of the router and any public WANIP information before pasting here.