In tools ([admin@test] /tool> ip-scan ) where you can scan a ip range and location of used IP address’s, so this prevents using dublicate IP on the network which leads me on to my question is there a method to scan a network for used or was used on a router, in my case routed network /30 OSPF area backbone address’s
example
[admin@test] > routing ospf network
[admin@test] /routing ospf network> print
Flags: X - disabled, I - invalid
NETWORK AREA
0 10.150.0.12/30 backbone
1 10.150.0.40/30 backbone
2 10.150.0.16/30 backbone
3 10.150.0.48/30 backbone
4 10.150.0.128/28 backbone
5 10.150.0.100/30 backbone
6 10.150.0.52/30 backbone