Router 4 Port

Hardware MikroTik hardware general
1

Hi all,
i am seeking a 4 indipendet gigaEthernet port router.
Can anyone help me ?

I worked with a R2011, but this is only two ports.

thank you.
Mauro

2

See the block diagrams on the product pages. CCRs have independent ports. But maybe you don’t need exactly that, you should describe your situation to get better advice…

3

Hi.
The new RB750Gr3 ? If I read correctly, it has no switch, all ports connected directly to CPU…

Best regards: CsXen

4

Thank you.
I need 4 indipendent port with 4 ip address because i need to perform Policy Based Routing.

Thank you.
Mauro

5

And your ISP gives you gigabit on each link?

6

As the data pass through the router, you need at least 2 times more capacity of such ports, otherwise what would you do with the traffic?

7

No but my ISP give me more than 100Mb on each link. :smiley: :smiley:

Thank you.
Mauro

8

You need processing capacity. Look at ccr at least.

9

Peli: RB750Gr3 has either one or two internal Gigabit links to the built in switch (that has 5 external ports). Unless you need more than 1Gbps combined up+down, a single 1Gbps internal should be enough.