Hello,
i’ve been working with Mikrotik for about 4 weeks and need feedback for my Router/wAP settings.
to my settings:
I have 3 VLANs…
VLAN 1 (192.168.1.0/24) is for my devices like Switch, AP etc.
VLAN 10 (192.168.50.0/24) is my home network.
VLAN 20 (192.168.55.0/24) is my guest network
OpenVPN (192.168.123.0/24)
Ether1 is my WAN.
Ether2 goes to a switch.
Ether3 - ether6 goes to normal devices.
My wAP is connect with the Router over a Bonding (ether7 & ether8).
Wlan1 and wlan2 is my home network.
Wlan3 and wlan4 is my guest network.
I’m not sure if i have set the bridge / vlan / bonding settings correctly.
Thanks for your time and feedback!
Router.cfg.rsc (6.54 KB)
WAP.cfg.rsc (4.8 KB)