router rebooted automatically after system shutdown

Hello,

On a RB941 board running on 6.25, I see that after I shutdown (through system shutdown command) the board, a few moments later, the board would come up alive again. Is this the expected behaviour of “system shutdown” command?
Is there a way to completely shutdown and not come alive again until someone reboots (unplug and plug back the power) it manually?
I would expect shutdown to be shutdown (not reboot).

Thanks



[admin@MikroTik] /system resource> print
uptime: 1m11s
version: 6.25
build-time: Jan/19/2015 10:11:08
free-memory: 11.6MiB
total-memory: 32.0MiB
cpu: MIPS 24Kc V7.4
cpu-count: 1
cpu-frequency: 650MHz
cpu-load: 13%
free-hdd-space: 8.2MiB
total-hdd-space: 16.0MiB
write-sect-since-reboot: 55
write-sect-total: 20515
bad-blocks: 0%
architecture-name: smips
board-name: RB941-2nD
platform: MikroTik




192.168.3.227 56 64 0ms
sent=800 received=656 packet-loss=18% min-rtt=0ms avg-rtt=0ms max-rtt=0ms
HOST SIZE TTL TIME STATUS
192.168.3.227 56 64 0ms
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
sent=820 received=657 packet-loss=19% min-rtt=0ms avg-rtt=0ms max-rtt=0ms
HOST SIZE TTL TIME STATUS
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 timeout
192.168.3.227 56 64 0ms
192.168.3.227 56 64 0ms
192.168.3.227 56 64 0ms

Hi,

“/system shutdown” is intended to shut the system down, not rebooting it.
Yesterday I configured a couple RB941 and they properly shut down when “/system shutdown” was issued.

I’m using RouterOS 6.30.2. Please try updating your device.

Ape