Routerboard 411/411R with RouterOS 6.6

RouterOS Beginner Basics
1

Hi all,

I have got a Routerboard 411/411R with RouterOS 6.6 installed.
The Router was running with the trial license for 24hrs. Now as the 24hr are over, I am unable to access the Router at all.
I was thinking about buying a license soon after I have completed my testings but now I do not get a link when connecting a Computer to the LAN port of the Router. No light are flashing at all. The router was running at default IP 192.168.88.1.

If I do a “ping -t 192.168.88.1” on my computer while having the device connected and then reboot the router, I can see that the LEDs of the LAN port are flashing and one ping reaches the device. Then the LEDs are not flashing anymore and Windows says, that the network cable is unplugged.

Any hints? Resetting the devices does not work / help.

Thanks in advance and best regards,
Patrik

2

Set your computer IP to 192.168.88.5 then connect a cable from your computer to either 1 of the Mikrotik and open Winbox and then click on .. next to the address bar.

You should be able to see the device mac using admin and no password and select it and that should get you into the device.

3

I will try that but I guess that wont work because Windows says that the Network calble is unplugged.
So even MAC based access wont work if the link does not come “up”.