I have started a thread in wireless networking but that is the wrong spot for a problem like this so i am posting in the correct segment. I have a routerboard 112 that for some reason does not want to communicate on any of its interfaces. Ether1 is no good it will not send anything back to my computer packets send but not received, seconldy wireless, it sends and receives data but does not allow me to acces the routerboard at all, winbox webox does not work, lastly serial, i have the serial cable, its the correct cable 232c, i setup hyperterminal to the port that it is on, set rate of 115200, data bits 8, party none, stop bits 1, and none for flow control, routerboard is shut off, once i turn it on nothing shows up in hyperterminal, cant push any button in 2 seconds because nothing shows… I need someones experties help here, The hole reason it stared all of this was because i disabled ether the bridging interface, or ether1… i am not sure because it disconnected me right after i did that… Here is incorrect placed thread with more info on what i have been doing with it. http://forum.mikrotik.com/t/routerboard-trouble/17553/1
As i said if anyone in the usa (To pricey to ship international) wants to have a crack at it i will ship it to them to try to netinstall it… Im going to this extent because i cant seem to be able to do it and it seems i have exahusted everything possible for me to do… Please help Anyone -Jordan