RouterBOARD SXT 5HnD

honzam · January 7, 2011, 12:43pm

SXT 5HnD is a low cost, high speed 5GHz wireless device. Dual
chain 802.11n and Nv2 TDMA technology help to achieve even
200Mbit real throughput speed.

http://www.mikrotik.com/download/share/sxt_onepage2.pdf

jcem · January 7, 2011, 1:08pm

Niiiiice!

When will they be available?

RGDS

jtroybailey · January 7, 2011, 1:10pm

price estimate?

honzam · January 7, 2011, 1:12pm

89dolars

normis · January 7, 2011, 1:24pm

already shipping to distributors, general announcement will be sent on monday

jtroybailey · January 7, 2011, 1:35pm

Australia as well?

normis · January 7, 2011, 1:36pm

Depends if your local distributor ordered them. Also, Australia is a bit further away

mwheeler · January 7, 2011, 1:45pm

Is it possible to configure two of these up in a P2P fashion ? The license level says 3, so that means it wouldn’t be able to be configured as a AP, right? It looks like it has the grunt to do it based on my spec sheet.

sergejs · January 7, 2011, 1:47pm

mode=bridge is supported for level3, mode=bridge allows to make PTP link.

normis · January 7, 2011, 1:51pm

Like Sergejs said, L3 is enough to make a P2P link.

NetworkPro · January 7, 2011, 2:17pm

Will it work if the AP is MT but not N standard (older Atheros card) but has NV2 enabled? In 20Mhz channels. What about same situation with 40MHz channels?
Thank you.

normis · January 7, 2011, 2:21pm

If you set the SXT to mode “any”, it will connect using the mode which AP uses. When you replace the AP, it will reconnect with the best mode.

uldis · January 7, 2011, 2:25pm

Remember that old Atheros chipset cards 40mhz option (turbo) isn’t compatible with N cards 2x20Mhz option.
SXT has built-in N Atheros chipset.

jcrites2008 · January 7, 2011, 5:06pm

Where’s the love for 2GHz? Last two products to be released are 5GHz only, I am trying to patiently wait for MUM.

changeip · January 7, 2011, 5:40pm

NICE! Finally there is some light at the end of the tunnel. I’d way rather buy MT than the cheap plastic (that seems to work great for CPEs).

Whats the real ETA on these?

leo_cakep · January 7, 2011, 6:21pm

and will mikrotik make RB711A-5HnD?
wanna try connect it to ub*t sectoral antenna…

normis · January 7, 2011, 8:40pm

http://forum.mikrotik.com/t/routerboard-sxt-5hnd/43630/5

laurinkus · January 7, 2011, 8:57pm

Impressive!!!

Is this product suited for outdoor installations ?

kapulan · January 7, 2011, 9:34pm

Nice production , esd protection the ethernet port?

nz_monkey · January 7, 2011, 10:07pm

Congratulations on all the hard work guys! It looks like a great product.

I predicted a product like this would come out, way back http://forum.mikrotik.com/t/prediction-mikrotik-cpe-with-integrated-antenna/30101/1

It says it has an extended L2MTU, is this just on the wireless side? or ethernet as well ?

next on my wish list, Cavium powered RouterBoard’s with SFP/SFP+