RouterOS problems when using usb flash drive as storage for

RouterOS General
1

Hello,

After several threads that i read, i’ve reached to the conclusion that i should open this topic for this kind of problems.
Short brief of my problem :

  • after i installed the routeros software on the usb flash drive and booted the x86 machine all the hardware components where detected correctly and all router functions where started and worked well for a couple of days. After a random number of online days (8,9,10) the routeros started to report that there are no x86 hardware components detected, files storage and any other modifications that i want to make on this router could not be apllied.

Please tell me if there is something wrong with my usb flash card or there are any other problems, because the situation stated above can be resolved only if i reboot the machine.
I will atache to this post the supout.rif file to give you more accurate informations as i can.

Best Regards,
Andrei Tatulescu
supout.zip (322 KB)

2

Deleted because not related.

3

Hello,

No problem with the hints that you gave me, infact, i will better follow your guidence :

  • the machine is an x86 hardware ;
  • the usb flash disk : SanDisk Cruzer Blade 2 GB
  • cpu is Intel P4 + HT at 3 Ghz
  • 512 MB RAM
  • network adapter :
  • 2 x Rtl Semicond RTL8111/8168B PCI Express Gigabit Ethernet controller
  • 1 x Broadcom Netlink BCM5789 Gigabit Ethernet PCI Express
  • 1 x 3Com 3c905C-TX/TX-M(Tornado)
  • 1 x Intel Corp 82541PI Gigabit Ethernet Controller
  • the motherboard is Gigabyte for intel processors with 82945G chipset
  • the routeros used is 5.17

If someone has a clue for what is going on with my system it will be great appreciated.

Best Regards,
Andrei Tatulescu

P.S. : By the way, how can i reach mikrotik tech support to forward the supout file ?