RouterOS v3.1 and v2.9.50 connecting problems

Hardware MikroTik hardware general
1

Hi everybody,

today I tried to connect 2RBxxx together on 2km range.
One side is RB532A with ROS v2.9.50
Second side is RB333 with v 3.1

these two RB cannot se each other (R52 cards used).
I tried everything (manual TX control, regulatory domain, TX power over the legal norm and so on…)
I cannot see other side (SCAN. ALIGN) from RB532 either from RB333.

This problem was solved after upgrading RB532 from v 2.9.50 to v3.1.
I think this is very bad situation :confused:


After upgrading RB532 with v3.1 I see that my RB532 lost its system performance.
The winbox controlling is slower and the winbox disconnects sometimes from RB.

Downgrade on V3.2 on RB333
2

we have had the same issue with 3.1 but ONLY on boards with sr9/xr9 radios on them.

trying to make a connection between a ros 3.1 board w/sr9 or xr9 to a ros 2.9.x board w/sr9 or xr9 is next to impossible. we had to downgrade.

3

this bug with SR9 will be fixed in v3.2

4

cool!

ETA at all for v3.2?
will it cover the xr9 as well?