What’s new in 5.0beta6 (2010-Aug-10 13:22): *) sstp - fixed memory leak; *) wireless - changed band setting and added channel-width setting *) wireless - support for 11n rates in 5&10mhz channels *) wireless nv2 - fixed multiple problems including occasional tx stall; *) made gps accessible thr…

how did you set tc /rx queue in mikrotik? what command?

I see posted TCP throughput increase using Nv2 on 802.11n, but is there any increase on 5Ghz Turbo as well?

OMG confirmed on a RB433AH - stable though…

bonding might be some problems sometimes can not follow the desired work and cause system crashes, such as interfaces lost. . . . pppoe mode can not have the desired effect？ NIC 82546EB X 2 Switch HP 2650(J4899B) [kkk.jpg]

please update kernel to 2.6.35 , atuo save irq problem 、improve netwokr performence palese !!! tanks

We tested on a simple 10mhz wide link with 2.4 radios sr2 and KXS30SG radios and they would only connect in B no matter what was set. quickly went back to 5b5 all better…

Point A: RB433AH Point B: RB411 Only good old fashioned NStreme works as nv2 ,nv2 nstreme and nv2 nstreme 802.11 briefly ascotiates, but disconnects almost immediatly. log: 00:28:01 wireless,info 00:0C:42:3A:XX:XX@wlan1 established connection on 5520, SSID XXX 00:28:06 wireless,info 00:0C:4…

Hello normis, You may have a look at ticket #2010072666000136 Nobody told me about beta5 upgrade problem (IRQ stuff). Check mine and support replies. Of course I am going to test new betas but with installing on another system… Thanks

There is no P Throughput on the Signal tab when monitoring a connection using Nv2. We are using a RB433UAH with a single XR3 for testing. Is this by design or a bug?

RouterOS v5 beta 6

RouterOS General

Chupaka August 13, 2010, 7:21pm 32

http://forum.mikrotik.com/t/add-software-receive-packet-steering-patch/33533/11