Hi,
I’ve just verified that two boards are not reachable if behind a bridged link with a Nv2 wireless link (like the one shown by “himmi” in his post):
DEVICE A…DEVICE B - Station…DEVICE C - AP…DEVICE D
RB1100 eth1---------- eth1—wlan1 >>>>>> <<<<<<<< wlan1----eth1 --------- eth1 RB1100
BRIDGE in device B with ports “eth1” and “wlan1”
BRIDGE in device C with ports “eth1” and “wlan1”
I can see al 4 devices as Neighbors but ping is quite weird:
From D I can ping C and B, but not A
From A I can ping only B
Looks like an issue related to the “bridge” interfaces, this happens with Nv2 and Nstreme as “wireless-protocol” and I’m not using WDS since it’s known as non working yet. And yes, all IP addresses are properly set!
Bye,
mattia