What’s new in 5.0rc3 (2010-Oct-29 09:02):
*) wireless nv2 - fix stalls on encrypted 11n links using high rates;
*) wireless nv2 - fix encryption related kernel crash;
*) sstp - fixed memory leak;
*) fixed problem - bad boot/kernel crc was reported on powerpc boards
when in fact it was good;
http://download.mikrotik.com/all_packages-ppc-5.0rc3.zip
404 Not Found at 10.34am PST on 10/29
just checked - works fine.
Try downloading using the torrent maybe.
X86 from Lat = ok.. From US = FAIL.
Torrent Almost NO seeeds (Yet)..
Will watch it..
Works from Sweden…
Works now via HTTP.
I just built the entire structure and am now seeding it. hopefully that helps.
Thx Sam…
RC2 and RC3 blocks all traffic from my network to gateway. I have a public IP class and I dont have any routing system.
Downgraded to RC1 and works fine.
WARNING!!!
Do not use this version in production system, at least not in x86 systems.
It breakes your firewall settings.
/Paul
Can you be more specific? I have about 200 rules on my RB800 with L7 connection-mark and jump rules and so on. No problems like RC1. To my knowledge all works.
But it might be as you say only on x86. Uldis said something about content filtering not working. See below
scripts dont work properly either on x86
I just tested NetInstall. It formated and installed the setup thing on a USB drive that had older RouterOS on it. After booting this USB drive - Setup did not find any harddrives. And with v3 this works.
I also tested to upgrade RC1 to RC3 in demo mode. In log it states the package was installed. But in fact the process was quick like a flash and when it booted up the version was still RC1 and the package was not installed.
Another thing - there are still problems in /store disk, the reported size sometimes is 0, and after a restart - its ok again.
You a license to change versions, upgrade/downgrade won’t work in demo license
Oh yeah you are right. But it did not give the proper error message.
About 24hrs and I think the memory leak in SSTP may be fixed… Its dropped a little, but that may just be everything “settling in”. Will know in a couple days.
Firewall is working on ppc and mipsbe so far as I can tell. Mangle, marking, filter, nat.
Correct, the content matcher still breakes the filtering.
I disabled the rules with content matcher and it works again.
On my Linux server I can’t execute command like this anymore:
ssh user@remote_mt ‘/export file=backup’
I use passwordless login. This worked on 3.x and 4.x.
In the same time, command like this is still working fine:
ssh user@remote_mt ‘/file print’
So, there seem to be some problem with new SSH daemon.
This is on RB800, I haven’t tried other platforms.
And thank you for adding Serbia on the countries list 
scripts don´t work on x86
What exactly script function is not working? We know that ping is not returning a value. This should be fixed in final version.